How to Insulate Your Attic

home attic

Attic insulation may appear to be a straightforward job but the process actually has quite a few number of pitfalls. As the cold weather is approaching most of the parts in the country, it means it is the right time to make some efforts to insulate your attic so that you can have a warm winter in your home.

Here are few professional tips for insulating an attic:

HOLES/GAPS

The very first task is to do a close inspection of your attic floor to ensure that there are no unwanted holes in the floor at all. Fill the unwanted space around wires, ducts,and pipes etc. with the help of caulk or fiberglass.

Recessed Lighting Fixtures

Although the recessed lighting fixtures must be covered with insulation material, the fact is that they can get extremely hot and can lead to serious fire issues.

Thus, it is essential to make a minimum clearance of at least 3 inches between insulation and recessed fixtures.

If you are thinking to use blown-in or poured cellulose, then it is important to be more careful because it often gets drifted on recessed fixtures with time.

The best idea is to replace the attic fixtures with a flush mounting lighting arrangement.

Vapor Barrier

Those who want to install paper faced or foil faced insulation, it is good to keep the facing side in a downward direction. The fact is that when facing is kept in an upward position then it may cause moisture trapping into insulation that means it may lead to an ineffective mess.

If you are thinking you might install loose fill insulation then a polyethylene sheeting type vapor barrier is the best choice for you as this type can provide a better coating.

The second layer of insulation must be made up of unfaced fiberglass material or loose fill type material.

Blanket Insulation

Never forget to install blankets or batts with complete care as it should not leave any open space towards any side of the section. Before you add the insulation layer, always be sure to check for tears and rips and if they are present then repair them right away.

Attic Fan Loose Fill Insulation

When blown or poured insulation is used near the attic fan then it is more subjected to unwanted drifts or shifts.

Ultimately it leads to bare or badly insulated areas on the attic floor. Such areas can be covered with the help of blankets or batts.

Check Animal Nests

There are chances that animals have created their nests in your calm and warm attic area. It is important to add proper care for insulation to the entry ways and repair the damage in the area.

Mold & Mildew

If you find any mold or mildew in your attic area then it means the area is not well insulated. It is good to improve safety to recover these issues so that attic area can have proper insulation with adequate ventilation.

 

Leave a Comment

Your email address will not be published. Required fields are marked *